Table of Contents
Overview
If something isn’t quite right with your Amazon Signage Stick, you’re in the right place. This guide walks through the most common issues in plain language. Let’s get your screens back up and running.
VegaOS Notice
Some Amazon TVs and Fire Sticks running the VegaOS operating system (Linux-based) are not compatible with Yodeck. If your device runs VegaOS, it will not work with Yodeck at this time.
1. What Is the Amazon Signage Stick?
The Amazon Signage Stick is Amazon’s dedicated digital signage device, built for 24/7 content playback in commercial settings like restaurant menus and advertising displays. It plugs into the back of your TV and turns it into a managed digital signage screen, powered by Yodeck.
What this means for you:
- No extra hardware or cables beyond the stick itself
- The Yodeck app comes pre-installed
- You manage everything remotely from the Yodeck Portal
⚠️ Heads up: The Amazon Signage Stick is different from a standard Amazon Fire TV Stick. This guide applies only to the Signage Stick. For a list of supported and unsupported Amazon devices, see Section 16.
2. Things the Amazon Signage Stick Cannot Do
Here’s what the Amazon Signage Stick doesn’t support. These aren’t bugs, they’re platform limitations.
| Feature | Supported? | What Happens Instead |
|---|---|---|
| Turn the screen on/off remotely | ✅ Yes | Supported via HDMI-CEC. When you set content to “Turned Off,” the screen turns off or goes into standby. Requires CEC to be enabled on the TV. See Section 14 |
| Restart the player remotely | ✅ Yes | You can reboot the device from the Yodeck Portal |
| YouTube and Vimeo live streams | ❌ No | Pre-recorded YouTube videos play normally |
| Supported Streams | ✅ Yes | HTTPS, HLS, DASH |
| Interactive apps (Interactive Library, Interactive Playlist, Interactive Kiosk) | ❌ No | Not available on this device |
| Webpage layering with other content | ⚠️ Caution | Webpages are always displayed above all other content in the same region. Layering is not supported |
| USB to HDMI Video Capture | ❌ No | Not available on this device |
| Timezone / NTP settings | ❌ No | Time is set automatically and cannot be adjusted from the Portal |
| Screen resolution selection | ❌ No | The device uses the TV’s native resolution |
| Sound output selection (HDMI / Analog / Muted) | ❌ No | Audio plays through the TV’s default output |
| Security configurations | ❌ No | Not available on this device |
| Network configuration from the Portal | ❌ No | Configure network settings directly on the device |
3. What Do the On-Screen Messages Mean?
| Message | What It Means | What To Do |
|---|---|---|
| Loading | The player is starting up | Wait a minute. This is normal on boot |
| Downloading | The player is receiving new content | Wait for it to finish. If it takes more than 5 minutes, check your internet connection |
| Registration Code | The player needs to be linked to your Yodeck account | Enter the 9-digit code in the Yodeck Portal under Screens > +Add Screen > Amazon Fire OS Player |
| Internet Access Required | The player has been offline for more than 30 days, or it was deleted and re-registered on another account | Reconnect the stick to the internet and check the “Last Online” date in the Portal |
| Apply Needed | Your schedule file is about to expire (within 3 days) | Click Push to Players in the Yodeck Portal right away |
| Device Deactivated | The screen was disabled because your account’s screen limit was reduced | Upgrade your plan or delete unused screens to free up a slot |
| No Content Assigned to Player | No playlist, layout, or schedule has been assigned to this screen | Go to Screens in the Portal, select this screen, assign content, then Save + Push |
| Updating | The Yodeck app is applying a software update | Wait. Most updates take 2 to 30 minutes. Do not unplug the device during an update |
4. Registration Code Not Appearing?
Work through these in order, from lightest to heaviest:
- Check your internet connection. The registration code needs internet access to appear. Wait 30 to 60 seconds after connecting.
- Reboot the stick. Unplug it from power, wait 10 seconds, plug it back in.
- Re-select Yodeck as the CMS. Go back through Amazon’s setup and confirm Yodeck is selected from the CMS dropdown.
- Check Wi-Fi strength. If on Wi-Fi, move the stick closer to the router and try again.
5. Blank or Black Screen Issues
A black screen is usually something simple. Work through these checks:
- Check the TV input. The remote may have switched to another HDMI input or a live TV channel. Switch back to the input where the Signage Stick is plugged in.
- Check the player status in the Yodeck Portal. Log in and go to Screens:
- Online: Wait up to 3 minutes for a screenshot. If it looks outdated, click Push Again to this Screen.
- Offline: See Section 6.
- Check the “Last Seen Online” date. After over 30 days, the player may have been disabled. You need to reconnect it to the internet.
- Make sure content is assigned. Go to Screens, select the screen, and confirm that a Schedule or Default Content is assigned. A player with no content shows a black screen.
- Try a Force Push. Click Push to Players in the Portal. This forces all players to re-check and restart playback.
- Reboot the stick. Unplug from power, wait 10 seconds, plug back in. Wait 2 minutes.
If the Signage Stick loses power, it resumes playback automatically when power is restored.
💡 Check your TV’s sleep settings: The Amazon Signage Stick is designed for 24/7 use, but the TV itself may have a sleep, auto-off, or screensaver timer that can override the player. These are TV-side settings that vary by brand. Refer to your TV’s manual to disable them.
6. Player Shows as “Offline” in the Portal
Your Amazon Signage Stick needs a working internet connection to stay in sync with Yodeck.
| Step | What To Do |
|---|---|
| 1. Test your internet | Check if another device on the same network can browse the web normally |
| 2. Reboot the stick | Unplug from power, wait 10 seconds, plug back in. Wait 2 minutes |
| 3. Check your network connection | If on Wi-Fi, move the stick closer to the router, or use a Wi-Fi extender |
| 4. Check for a login page | On a hotel, airport, or public Wi-Fi, a login page may block internet access. The stick can’t complete this login on its own. Ask the network admin to add the device’s MAC address to the allow list. |
| 5. Check your firewall | If your network has a firewall, the addresses below need to be allowed through |
Required Firewall Exceptions (all outbound)
| Address | Port | What It’s For |
|---|---|---|
hub.dsbackend.com | 443/TCP | Player communication with Yodeck |
repo.dsbackend.com | 80/TCP | Software updates |
dsbackend.s3.amazonaws.com | 443/TCP | Scheduling info and media downloads |
assets.dsbackend.com | 443/TCP | Media downloads |
Temporarily Offline?
Your player handles at least 30 days without internet. Content keeps playing during that time, though time-based scheduling may drift slightly since the player uses the internet to sync its clock. After 30 days, playback stops, and an “Internet Access Required” message appears. Reconnect to the internet to resume.
7. Content Not Updating on Screen
Did You Click “Push to Players”?
This is the most common reason content doesn’t update. After making changes in the Yodeck Portal, the button in the top-right corner turns orange and flashes “Push to Players?”. Click it to send your changes to the screen.
If the button is already black (showing “Changes pushed!”), clicking it again forces all players to re-check and restart playback.
Other Common Issues
| Symptom | Likely Cause | Fix |
|---|---|---|
| The screen shows “No Content Assigned.” | No playlist, layout, or schedule is assigned | Go to Screens, select the screen, assign content, and click Save & Push |
| The screen shows old content | “Push to Players” wasn’t clicked after editing | Click the orange “Push to Players?” button |
| Content is downloading, but takes more than 5 minutes | Network issue or web filtering | Check your internet connection (see Section 6) |
| Wrong content is playing | A Schedule is overriding the Default Content | Review the assigned Schedule and check which rule is currently active |
| Content plays at the wrong time | Incorrect timezone setting on your Yodeck account | Check the timezone in your Yodeck account settings |
💡 How Schedules work: A Schedule always takes priority over Default Content during its active time slots. Default Content is your fallback when no Schedule rule is active.
8. Video Playback Issues
| Symptom | Likely Cause | Fix |
|---|---|---|
| Video plays on its own, but not inside a Layout | The layout may be too complex | Reduce the number of zones or widgets in the layout |
| Video stutters or lags | Heavy layouts with many widgets can affect smooth playback | Reduce widget count, or use simpler content alongside videos |
| Video shows an error or won’t play | The video format may not be compatible | Re-upload in MP4 (H.264 codec) |
Supported Video Formats
For best results:
- MP4 (H.264 codec). Most reliable.
- WebM
- OGG
💡 If a video plays on your computer but not on the Signage Stick, the codec is likely the issue. Re-encoding to H.264 MP4 usually fixes it.
9. No Sound / Audio Issues
| Symptom | Likely Cause | Fix |
|---|---|---|
| No sound at all | TV volume is muted or set to zero | Check the TV’s volume using the remote |
| Sound works on some content but not others | The media file has no audio track | Check the file on your computer to confirm it has audio |
| Can’t change audio output (HDMI vs. analog) | Sound output selection is not supported on the Amazon Signage Stick | Audio plays through the TV’s default output |
| Audio and video are out of sync | The video file may have encoding issues | Re-encode the file and re-upload it |
10. YouTube and Streaming Issues
| Symptom | Likely Cause | Fix |
|---|---|---|
| YouTube Live Stream won’t play | YouTube and Vimeo live streams are not supported on the Amazon Signage Stick | Use a pre-recorded YouTube video instead |
| The YouTube video shows an error | The video may be age-restricted or region-locked | Try a different video, or host the video file directly in Yodeck |
| Streaming content buffers constantly | Slow or unstable internet connection | Check your connection speed and move the stick closer to your router |
| The video plays on your computer but not on the display | The format or codec may not be supported | Re-encode the file to MP4 (H.264) and re-upload |
💡 Tip: If you rely heavily on YouTube content, download the videos and upload them directly to Yodeck. This avoids playback issues caused by YouTube’s restrictions.
11. Webpage Display Issues
| Symptom | Likely Cause | Fix |
|---|---|---|
| Webpage looks broken or doesn’t load | The site may block non-browser access | Try a different URL, or take a screenshot of the page and use that as an image |
| The webpage always appears on top of other content | On the Amazon Signage Stick, webpages are always displayed above all other content in the same region. Layering is not supported | Design your layout so the webpage zone doesn’t overlap with other content zones |
| The webpage shows a login screen | The site requires authentication | Use a publicly accessible URL that doesn’t require a login |
| The webpage content is cut off or zoomed in too much | The website isn’t designed to display well on large screens | Adjust the zoom level inside the Yodeck webpage widget settings. You can also use a direct link to a mobile-friendly or embed-friendly version of the page if one is available |
| The webpage loads, but doesn’t refresh automatically | No refresh interval has been set | Set a refresh interval inside the Yodeck webpage widget settings. Without a refresh interval, the page stays frozen on whatever it loaded when the player last restarted |
12. Scheduling and Timezone Issues
In general, these devices provide a timezone selection in their device settings.
| Symptom | Likely Cause | Fix |
|---|---|---|
| Content plays at the wrong time | The timezone on your Yodeck account may be incorrect | Log in to your Yodeck account, check the timezone in your personal settings, save the form, and push the changes to the players |
| The schedule doesn’t activate | The schedule isn’t assigned to this screen | Go to Screens, select the screen, and confirm the correct Schedule is assigned |
| Default content plays instead of scheduled content | The schedule’s time slots don’t cover the current time | Review the schedule rules and confirm that the active time slots are correct |
| The schedule worked before, but stopped | The schedule file may have expired | Click Push to Players to send a fresh schedule file |
| Content plays at the right time on one screen but not another | Each player uses its own local timezone | Every Yodeck player uses its own local time zone to interpret schedules. A single schedule adapts to each player’s location automatically. No manual conversion is needed |
💡 How Schedules work: A Schedule takes priority over Default Content during its active time slots. Default Content is your fallback when no Schedule rule is currently active.
13. Registration and Account Issues
| Symptom | Likely Cause | Fix |
|---|---|---|
| The registration code screen keeps appearing after setup | The code wasn’t entered correctly, or the player lost its registration | Log in to the Portal, go to Screens > +Add Screen > Amazon Fire OS Player, and enter the 9-digit code again |
| “The registration code given does not match the player type.” | The player type selected in the Portal doesn’t match the registration code shown on screen | Check the prefix of the registration code on screen and select the matching player type in the Portal |
| The registration code doesn’t appear on the screen | The player isn’t connected to the internet | Internet access is required for the code to appear. Check your Wi-Fi connection and try again |
| Player registered, but no content is playing | No content has been assigned to the screen | Go to Screens, select the screen, assign a playlist or layout, and click Save + Push |
| The screen shows “Device Deactivated.” | The screen was disabled because your account’s screen limit was reduced | Upgrade your plan or delete unused screens to free up a slot |
| The player was deleted from the Portal by mistake | Deleting a screen removes it from your account | Add the screen again using +Add Screen and enter the registration code shown on the TV |
💡 Keeping the Yodeck app up to date: The Yodeck app on your Amazon Signage Stick updates automatically. You may occasionally see an “Updating” message in the bottom-right corner of the screen. This is normal and means the player is applying a software update. Updates typically take between 2 and 30 minutes. Do not unplug the device during an update. If the “Updating” message has been showing for more than 2 hours, contact Yodeck Support.
14. Remote Screen On/Off (HDMI-CEC)
The Amazon Signage Stick can turn the TV on and off remotely via the Yodeck Portal, but this requires HDMI-CEC to be enabled on the TV itself. CEC goes by different names depending on the manufacturer.
| TV Brand | CEC Name |
|---|---|
| Samsung | Anynet+ |
| LG | SimpLink |
| Sony | BRAVIA Sync |
| Philips | EasyLink |
| Panasonic | VIERA Link |
HDMI-CEC Troubleshooting
| Symptom | Likely Cause | Fix |
|---|---|---|
| Remote on/off doesn’t work | CEC is disabled on the TV, or the Signage Stick is plugged into a non-CEC HDMI port | Enable CEC in your TV’s settings (using the brand-specific name above). Try a different HDMI port if needed. Some TVs only support CEC on specific ports |
| Remote on/off worked before, but stopped | A TV firmware update may have reset CEC settings | Go to your TV’s settings and re-enable CEC |
15. Factory Reset and Reinstalling the Yodeck App
The Amazon Signage Stick is managed by Amazon’s signage platform, so a factory reset is performed in the device’s settings, not through the Yodeck Portal.
| Situation | What to Do |
|---|---|
| The Yodeck app is crashing or behaving unexpectedly | The Signage Stick automatically re-downloads Yodeck during the CMS selection step during setup. If it doesn’t appear, repeat the setup and select Yodeck from the CMS dropdown |
| You want to completely start over with the device | Go to Settings > Device Options > Reset to Factory Defaults. This wipes the device and returns it to its out-of-box state. You’ll need to go through Amazon’s setup again and re-select Yodeck as your CMS |
| After a factory reset, the Yodeck app doesn’t appear | The Signage Stick re-downloads Yodeck automatically as part of the CMS selection step during setup. If it doesn’t appear, repeat the setup and select Yodeck from the CMS dropdown |
| You reset the device, but the old screen still shows in the Portal | The old screen entry will show as Offline. Delete it from the Screens in the Portal and register the device again as a new screen using the registration code shown on screen |
⚠️ Before resetting: A factory reset cannot be undone. If you only need to re-register the device, try deleting and re-adding the screen from the Yodeck Portal first, without resetting the device itself.
16. Supported Devices
This guide is written specifically for the Amazon Signage Stick, which is the only Amazon device fully supported for 24/7 digital signage with Yodeck.
⚠️ Using a different Amazon device? If you’re using a standard Fire TV Stick or Fire TV, some features may not work as expected. Visit our Help Center for a full list of supported and unsupported Amazon devices.
Need Help?
The Yodeck Support Team can help you out! Log in to your Yodeck account and send us a message from the bottom right corner!